Mr. Beams Intelligent LED Battery-Operated Lights
Battery Powered Motion Sensing LED Remote-Controlled Path Light Features
Attach a path light anywhere: on your sidewalk, steps, yard, front porch, in your garden and more. The MB542 from Mr. Beams can be wall mounted or can mount to a stake that can be driven into the ground. Mr. Beams offers simple installation with no wiring and no electrician needed. Runs on 3 C batteries (not included).
Mr. Beams LED lights provide indoor and outdoor lighting solutions where you need them most. Intelligent motion-sensors activate battery-operated LED lights for hands-free lighting. All units are IP44 rated, which means the weatherproof design will satisfy both indoor and outdoor LED light applications. All Mr. Beams LED lights install easily--no wiring, no electricians--so you can be assured of quality LED lighting anywhere.
Stake mounted path light is easy to install outdoors along a sidewalk. View larger
The MB542 includes a remote control for turning the light on and off. View larger
The MB542 Wireless Path Light--An Improvement Over Solar Path Lights
The MB542 is a patented wireless lighting solution from Mr. Beams. The MB542 is battery powered and has wireless controls (motion sensor and remote control) to provide a consistent bright light that turns on automatically when motion is detected or via remote control when you need it. Operated with C batteries and intelligent controls to extend the battery life, the MB542 will typically run on a set of batteries for over a year. The MB542 provides a brighter light than solar path lights and does not require direct sunlight to operate.
Solar path lights can be disappointing when they are not bright enough or do not recharge to a level to provide illumination through an entire night. The MB542 offers a strong alternative to solar path lights to address your needs for outdoor lighting along paths, walkways and stairs outside of your home.
Tight seals and weather-resistant materials allow a Mr. Beams remote control and motion sensor battery operated indoor/outdoor LED path light to work in all weather conditions.
The Mr. Beams remote control and motion sensor battery operated indoor/outdoor LED step light turns off automatically when no motion is detected, conserving battery life. The automatic shut-off period is adjustable using a switch to select between 20 or 10 minutes of delay from the last motion that was detected or last remote control ON received to shutting the light off.
Remote Control Activated
The MB542 includes a remote control for turning the light on and off. The remote control operates the entire group of path lights using radio frequency (RF) control. It does not require line of sight thus you can turn the path lights on and off from inside your house or at a distance beyond the range of the motion sensors.
Motion Sensor Activated
A path light instantly turns on when it detects motion, and can detect motion from as far as 12 feet away with 180 degrees of vision.
A built-in photocell activates the remote control receiver and motion sensor only after the sun has set or when the lights are out.
Bright LED Light
The bright LED and housing design focus the light where you need it--perfect for wall-mounted or ground-installed lighting applications.
LED Glow Mode
In glow mode, the LED light will remain turned on at a very low light level. At the very low light level, the light serves as a marker light identifying where the sidewalk or deck stairs start, for example. When a user approaches, the motion sensor will turn the light on to a bright light output to provide more light. After the auto shut-off time in which motion has not been detected, the MB542 will return to LED glow mode.
Durable, Energy-Efficient LED
The bright LED never needs replacing--it's so efficient that you will get more than 5,200 activations on one set of batteries with the auto shut-off set to 20 seconds.
The perfect light for front steps, deck stairs, outdoor stairwells, and more. View larger
Easy to Install
The MB542 from Mr. Beams is a battery-powered, wireless, remote control and motion-sensor activated LED path light that requires no wiring. Simply insert batteries and attach to a wall or to a stake that can be driven into the ground. The unit is designed such that you can mount it in a convenient location and it won’t get in your way. These are fantastic and bright stair and path LED lights for decks, stairways, steps, gardens, sidewalks, closets, garages, alleys, patios, yards and sheds.
Inadequate lighting is a leading cause of unintentional injuries due to falls around the house. The MB542 Path Light can reduce the likelihood of falls by illuminating stairs and walkways. The LED glow mode operates all the time to provide a marker light for someone to know, for example, where the sidewalk, pathway or stairs start. When someone gets close enough, the motion detector will turn the light on brightly to offer real path or stair lighting to light up the walkway.
What's in the Box
Two Mr. Beams MB542 remote control and motion sensor battery operated indoor/outdoor LED path lights, Mr. Beams MB110 remote control, 2 mounting brackets, 2 pieces of double sided tape, 4 screws, 4 anchors, 2 ground stakes, user manual.
- Bulb type: LED
- Bulb color: neutral white
- Bulb life: 50,000 hours
- Bulb strength: 20 lumens
- Light range: 10 square feet
- Motion detection range: up to 12 feet, 180 degrees
- Remote control range: Up to 70 feet
- Power source: 3 C-cell Alkaline or NiMH batteries (not included)
- Dimensions: 1.75 x 3.5 x 3.0 inches
- Weight: 5 ounces