CDN$ 29.99 + CDN$ 12.00 shipping
In Stock. Sold by Canada Computers & Electronics
Quantity:1

Compare Offers on Amazon
Add to Cart
CDN$ 50.48
+ Free Shipping
Sold by: Duty Free Shop
Add to Cart
CDN$ 65.20
+ CDN$ 7.64 shipping
Sold by: grabthesale

Image Unavailable

Image not available for
Colour:
  • Sorry, this item is not available in
      

NZXT Technologies Kraken G10 Liquid Cooled GPU Mounting Kit, Red KRG10-R1


Sale: CDN$ 29.99
Only 2 left in stock.
Ships from and sold by Canada Computers & Electronics.
3 new from CDN$ 29.99
  • Universal mounting hardware provides easy installation
  • Wide compatibility for over 24 different reference graphics cards and more than 19 different all-in-one liquid cooling solutions. See product description for full compatibility details.
  • With an included 92 mm fan to provide addition VRM cooling


Product Details

  • Product Dimensions: 21.9 x 14.1 x 6 cm ; 286 g
  • Shipping Weight: 386 g
  • Item model number: KRG10-R1
  • ASIN: B00JV3WUK0
  • Date first available at Amazon.ca: April 22 2014
  • Average Customer Review: 4.5 out of 5 stars  See all reviews (2 customer reviews)
  • Amazon Bestsellers Rank: #135,186 in Electronics (See Top 100 in Electronics)
  •  Would you like to give feedback on images?


Product Description

NZXT Kraken G10 features wide compatibility for over 24 different reference graphics cards and more than 19 different all-in-one liquid cooling solutions. With an included 92mm fan to cool the VRM and the high performance abilities of the Kraken cooler, the Kraken G10 offers over 40% cooling increases over stock coolers, a level of performance only previously achievable with a costly custom liquid cooled setup.

What Other Items Do Customers Buy After Viewing This Item?


Customer Questions & Answers

Customer Reviews

4.5 out of 5 stars
5 star
1
4 star
1
3 star
0
2 star
0
1 star
0
See both customer reviews
Share your thoughts with other customers

Most helpful customer reviews

Verified Purchase
Works exactly as advertised. The mounting section is annoyingly limited due to the fan placement. You would think this wouldn't be that big of a deal, but just try to mount a non-supported AIO on it, I dare you. Even the supported AIO's can only fit in one specific way, so it really limits tube routing.

When tightening the mounting screws, be careful not to overtighten because they don't bottom out, and the plate itself bends very easily. You have to judge it by eye, and mounting is a challenge, I suggest having 4 hands.

The bracket looks beautiful once installed, but moving the VRM fan back just an inch would have done wonders for AIO compatibility options. Also at 35$ it's a bit pricey, but the fan is good quality and the bracket is beautiful. I don't regret my purchase. Just don't cheap out on a radiator! I got a 50$ H55, and I regret it now, the temps are awful.
Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again.
0 of 1 people found the following review helpful By Kenneth on May 21 2014
Verified Purchase
The products I purchased were great!
NZXT makes top quality products.

Unfortunately I failed to notice that I was charged $75.01 for shipping!

This is a disgrace! THIS WILL BE MY LAST PURCHASE THRU AMAZON CANADA!

Kenneth C Neil
Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again.

Most Helpful Customer Reviews on Amazon.com (beta)

Amazon.com: 44 reviews
6 of 6 people found the following review helpful
I would have gone full watercooling loop to cool my graphics cards but there was no "full block" ... Aug. 10 2014
By flydig - Published on Amazon.com
Verified Purchase
Kraken G10 x2 installed on 2x GTX 770 SuperClocked Dual Bios 4GB with Corsair H90 cooler.

I would have gone full watercooling loop to cool my graphics cards but there was no "full block" available for my card. So this was the cheapest and most effective route and did not disappoint.

Installation was as expected, not too hard. I left the metal front-plate/passive heat sink on, but had to modify the plate slightly with the dremel tool to cut back the 4 tabs around the GPU by about 1/8 inch each (this includes part of the aluminum nut, shaving off to just before the threads). This allowed the H90 block to sit with about 1/32" of clearance all around. I also installed copper VRAM-size heatsinks on top of the plate to assist with cooling, directly over the VRM chips.

Performance has been excellent. About a 40% drop of temps as advertised. Was hitting 80 degrees in benchmarks and games, even with fan profile set to full RPM at 75c. Now I hit about 45-50 in the same situation, with absolute max around 60 degrees after a few hours. This is with the H90 with 2 silverstone generic 140 fans running about 50% speed (totally silent). I used the silverstones because the included H90 corsair fans were rattling and extremely noisy. If I up the speed of the fans, I get an additional 5-10c drop but to me I want silent, and temps are cool enough, so I keep them at 50%. This is also with a 50core+300memory overclock on both cards.

All in all, highly recommend this product, it allowed me to finally +OC my graphics cards and keep them dead silent in the process... before, stock (factory OC) resulted in very noisy GPU fans all the time when under load and throttling of the card at 80c which hurt perf with fps spikes at times. But be sure to check out your VRM situation to make sure these get cooler by more than just fan air on direct chip. I used a temp probe and am getting max 70c on the back of the card above VRMs at max load, using the included passive heatsink plate that came with the card + the copper heatsinks added on the plate to help. I am guessing around 80c is the actual VRM max temp under load.
3 of 3 people found the following review helpful
Installation was very easy. Instructions were straight forward and everything came together ... Nov. 29 2014
By Gabriel Reyes - Published on Amazon.com
Verified Purchase
I have dual Powercolor Myst and they were baking hot! 34-45°C idle, 80-90°C under load, stock timings, not overclocked. I paired a single G10 with a Corsair H90 and some copper vram heatsinks on the main card and it brought down temperatures tremendously. Now the main card idles around 30°C and under load never gets over 50°C.Truly impressive!

I am waiting on a second G10 and H90 to put on the secondary card. Installation was very easy. Instructions were straight forward and everything came together fine. It was a bit of a hassle trying to wrangle the tubes on the H90 in to place but with a little patience and dexterity everything snapped into place perfectly.
2 of 2 people found the following review helpful
great product June 30 2014
By Ivan diaz - Published on Amazon.com
Verified Purchase
The kraken G10 is a great product with great results, my Evga 560ti 448 classified reached a temperature of 75c to 80c while playing with the factory cooler, then after assemble the Kraken G10 the temperatures didn't pass the 48c while playing. Now the only problem that you'll find is, that the vrm and vram get hot even though the kraken brings a fan for the vrm, so I recommend to buy some mini heatsink and thermal pad to help with the heating problem in those areas.
1 of 1 people found the following review helpful
Good solution for cooler GPU temps and SLI configuration. Aug. 12 2014
By R. Lay - Published on Amazon.com
Verified Purchase
Kept my idle temps for 2 x GTX 680 FTW+ in SLI around 30C and at 10 minutes of heavy sim racing load at just under 59C. I'm using 2 Corsair H55s and a Cool Master HAF X case.

The installation of the bracket and cooler took about 25 minutes for the first one and 20 minutes for the second one. It actually took quite a lot of time to rewire everything and position the radiators and fans in the case (one hour plus).

The results are significantly cooler than the stock cooler, but depending on your radiator placement and case, it could end up heating up the room more. The was the only solution for SLI that I looked at (outside of custom watercooling) that could fit 2 coolers in my case for SLI. The brackets make the card a little unstable against the motherboard, compared to the stock cooler.

All in all, I'm happy with the results. I would suggest getting a cooler with longer hoses than the H55 (which are the cheapest on the market refurbished at $50 each). It would actually be fairly easy to put the GTX680s back in their stock case/cooler to sell them and use this bracket system with another card if necessary.
1 of 1 people found the following review helpful
Great buy keeps my gpu cool Oct. 4 2014
By thisguysIs - Published on Amazon.com
Verified Purchase
Awesome little adapter worked with my r9 280 sapphire dual-x.whent from around 45-50c idle to 30-35c and on full load i whent from 70-80c to 60-70c.i hooked it up with a corsair h55 quiet edition and it worked.

Update Review:
So my computer started shutting off when i started playing hard core games like sniper elite 3 and batman at max settings.So i did a furmak benchmark to see if it was over heating.so gpu never got over 65c but would still shutt off so i installed the old heatsink and it started working fine got up too 80c and still ran never shutting off so im guessing this never cooled off the other parts of the gpu making them over heat and shutoff.so my suggestion is i had an r9 280 and like most AMD cards they get hot so i would't suggest putting this on AMD cards.Also maybe use a 240mm radiator since the 120 still got pretty hot.

Look for similar items by category