Introduction.
Phase 1 Designing an Internetwork 1
Task 1.1: Drawing an Internetwork.
Task 1.2: Identifying Network Components.
Task 1.3: Differentiating Ethernet Devices.
Task 1.4: Discovering and Filtering MAC Addresses.
Task 1.5: Applying the OSI Model.
Task 1.6: Developing an IP Addressing Scheme.
Task 1.7: Designing a VLAN Scheme.
Phase 2 Implementing and Configuring the Design 51
Task 2.1: Assigning IP Addresses.
Task 2.2: Naming Network Devices.
Task 2.3: Installing Wireless NICs.
Task 2.4: Measuring Wireless Signal Strength.
Task 2.5: Implementing Bluetooth.
Task 2.6: Implementing Ad Hoc Wireless Networking.
Task 2.7: Using an Analog Modem.
Task 2.8: Using a DSL Modem.
Task 2.9: Using a Router as a Frame Relay Switch.
Task 2.10: Simulating T1 CSU/DSUs.
Phase 3 Maintaining and Securing The Network 137
Task 3.1: Creating Local User Accounts.
Task 3.2: Creating Local User Groups.
Task 3.3: Managing Access to Resources.
Task 3.4: Disabling Local User Accounts.
Task 3.5: Setting Password Restrictions.
Task 3.6: Mitigating the Ping of Death.
Task 3.7: Securing Links between Routers.
Task 3.8: Guarding against SYN Flood Attacks.
Task 3.9: Implementing File-Level Encryption.
Task 3.10: Establishing Data Encryption between Routers.
Task 3.11: Creating Data Backups.
Task 3.12: Running an Antivirus Scan.
Task 3.13: Running an Anti-spyware Scan.
Task 3.14: Searching for Operating System Updates.
Phase 4 Troubleshooting the Network 245
Task 4.1: Using ARP Utilities.
Task 4.2: Using the NETSTAT Utility.
Task 4.3: Using the FTP Utility.
Task 4.4: Using Ping Utilities.
Task 4.5: Using the IPCONFIG Utility.
Task 4.6: Using Traceroute Utilities.
Task 4.7: Using Telnet.
Task 4.8: Using the NSLOOKUP Utility.
Task 4.9: Using a Protocol Analyzer.
Task 4.10: Displaying Computer Event Logs.
Index.
