5 new from CDN$ 82.31

Image Unavailable

Image not available for
Colour:
  • Sorry, this item is not available in
      

Cooler Master RR-B10-212P-G1 Hyper 212 Plus 775/1156/1366/AMD/AM2/AM3 Universal Direct Contact Heat-Pipe 120mm Fan CPU Cooler (Discontinued by Manufacturer)


Available from these sellers.
5 new from CDN$ 82.31
  • Well-balanced cooling performance
  • Fan mounting using clips for easy installation and swapping
  • Versatile all-in-one mounting solution for Intel Socket LGA775/1156/1366 and AMD Socket 939/AM2/AM3
  • Silent operation with minimal noise level at 13 dBA


Product Details

  • Product Dimensions: 11.9 x 7.9 x 15.9 cm ; 626 g
  • Shipping Weight: 1.4 Kg
  • Item model number: RR-B10-212P-G1
  • ASIN: B002G1YPH0
  • Date first available at Amazon.ca: Aug. 14 2009
  • Average Customer Review: 5.0 out of 5 stars  See all reviews (1 customer review)
  • Amazon Bestsellers Rank: #69,170 in Electronics (See Top 100 in Electronics)
  •  Would you like to give feedback on images?


Product Description

Product Description

Succeeding the popular Hyper 212, the Hyper 212 Plus carries on the legacy of providing a great balance of performance and noise level during high and low speed operations.

Hyper 212 Plus is Cooler Master's first cooler to be equipped with an all-in-one mounting solution that includes LGA 1156 and 1366. Direct Contact heat-pipe is now also utilized in this latest update.

From the Manufacturer

From the Manufacturer
Succeeding the popular Hyper 212, the Hyper 212 Plus carries on the legacy of providing a great balance of performance and noise level during high and low speed operations. Hyper 212 Plus is Cooler Master's first cooler to be equipped with an all-in-one mounting solution that includes LGA 1156 and 1366. Direct Contact heat-pipe is now also utilized in this latest update.


  • Well-balanced cooling performance:
    • Computer aided heatsink design provides fin optimization with perfect balance between high and low speed operation.
    • 4 x Direct Contact heat-pipes for seamless contact between CPU surface and cooler.
    • Wide-range PWM fan with unique blade design for excellent airflow.
    • Upgradable to dual fans and swapping of fans with extra fan-clips included.
  • Fan mounting using clips for easy installation and swapping.
  • Versatile all-in-one mounting solution for Intel Socket LGA775/1156/1366 and AMD Socket 939/AM2/AM3.
  • Silent operation with minimal noise level at 13 dBA.


Aluminum fins with 4 x Direct Contact heat-pipes to provide excellent heat dissipation

Compatible with Intel Socket LGA 775/1156/1366 and AMD Socket 939/AM2/AM3

Capability for optional 2nd fan to increase cooling performance

New 120mm PWM fan with wide RPM range and anti-vibration rubber pads


    All Intel Socket 775/1156/1366 CPU
  • Intel Core™ i7 Extreme
  • Intel Core™ i7
  • Intel Core™ 2 Extreme
  • Intel Core™ 2 Quad
  • Intel Core™ 2 Duo
  • Intel Pentium
  • Intel Celeron
    All AMD Socket 939/AM2/AM3 CPU
  • AMD Phenom™ II X4
  • AMD Phenom™ II X3
  • AMD Phenom™ X4
  • AMD Phenom™ X3
  • AMD Athlon™ X2
  • AMD Athlon™
  • MD Sempron™


Model RR-B10-212P-GP
CPU Socket Intel®:
Socket LGA1366 / 1156 / 775

AMD™:
Socket AM3 / AM2 / 940 / 939
CPU Support Intel®:
Core™ i7 Extreme / Core™ i7 / Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium® / Celeron®

AMD™:
Phenom™ II X4 / Phenom™ II X3 / Phenom™ X4 / Phenom™ X3 / Athlon™ X2 / Athlon™ / Sempron™
Dimension 120 x 79.7 x 158.5 mm (L x W x H)
Weight 1.38 lbs; 626g
Heat Sink Material Aluminum fin
Heat Pipes 4 pcs
Fan Dimension 120 x 120 x 25 mm
Fan Speed 600 - 2000 R.P.M. (PWM)
Fan Airflow 21.2 - 76.8 CFM
Air pressure (mmH2O) 0.40 - 3.90 mmH2O
Bearing Type Long life sleeve bearing
Fan Life Expectancy 40,000 hours
Fan Noise Level (dB-A) 13 - 32 dBA
Connector 4-pin
UPC Code 884102005077

Customer Questions & Answers

Customer Reviews

5.0 out of 5 stars
5 star
1
4 star
0
3 star
0
2 star
0
1 star
0
See the customer review
Share your thoughts with other customers

Most helpful customer reviews

By BeN on June 10 2013
Verified Purchase
Great fan but you will be surprised by how huge it is compared to your stock CPU fan. Keeps CPU around 30'C on idle wich is perfect. Easy to install you basically just need a Phillips screwdriver.
Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again.

Most Helpful Customer Reviews on Amazon.com (beta)

Amazon.com: 1,008 reviews
171 of 186 people found the following review helpful
A must have! March 2 2010
By V. Argo - Published on Amazon.com
Verified Purchase
The Hyper 212+ is a must-have heatsink for your CPU if you do not wish to pay for pricy water cooling.

-Price
Only $30, when most high-end heatsinks are priced at $50+ on NewEgg. If you want your CPU to run cooler for a cheap price, the Hyper 212+ is perfect.
-Instructions
The manual has two to three pictures each step, along with the most minimal of a sentence that describes what the pictures want you to do. You're better off watching the youtube video that Cooler Master uploaded.
-Installation
Once again, I strongly advise just throwing out the given instructions and view the video that Cooler Master has uploaded to youtube. Installing was a bit tricky at first, one of the nuts refused to go the entire length of the screw, needed pliers to force it the rest of the way. After attaching the backplate, the rest of the process went very smooth.
-Performance
I installed this heatsink to a week-old i5 750 CPU. Temps were running 45C idle with stock heatsink. After applying the Hyper 212+, the i5 dropped to 28C idle. I have yet to encounter temperatures above 35C on heavy load. Overclocking the i5 to 3.6GHz, the temps rise to 37C idle, which is simply amazing. I previously tried to O/C with the i5's stock heatsink, and the temp skyrocketed to 65C after booting Windows.
-Additional Info
Comes with a 120mm fan attached onto the heatsink. The metal clips make it very easy to remove the fan for heatsink installation. Has an extra two metal clips in case you would like to add an additional fan on the opposite side for more airflow. In terms of noise, my case fans are louder than the packaged 120mm fan. The PC is positioned about 10 feet away from my bed, and I have no trouble sleeping because of noise.
The 212+ also came with its own thermal paste, a great little addition for those not wanting to spend $10 for a couple uses.

The only negative standpoint I would have with this heatsink is the size. Luckily, my case has a sidepanel window which bows out, allotting JUST enough clearance for the Hyper 212+ to fit. Make sure you measure the inside of your case before purchasing!

Other than water cooling, I have yet to purchase a heatsink that decreases the temperature by such a drastic amount. It is a great product for a cheap price, and I will be purchasing this heatsink for every new rig I build.
52 of 54 people found the following review helpful
Excellent Heat Sink April 8 2011
By S. Siegel - Published on Amazon.com
Conclusion: For around $30 I was able to cool an overclocked CPU to 55 degrees at 100% load, and 25 degrees at idle. Improved from Intel's Heatsink (70 degrees at 100%, 50 degrees at idle). Runs quietly, works very well, and highly recommended. Install not the easiest ever, but if you can assemble a PC from a stack of parts, this isnt going to be a challenge.

Thoughts:

1. This heatsink fits many CPUs/motherboards (1156, 1155, 775, AMD, etc.), which actually complicates installation a little. There are three different settings for the brackets depending on your motherboard and CPU, so you have to be sure and follow the correct instructions for your board. Not too hard if you know what the final outcome is supposed to look like. The enclosed instructions didn't show the settings for 1155 on it, so I just followed the 1156 instructions, which worked fine. SETUP = 4 stars

2. The heatsink is tall (it wouldnt fit in either of my standard Dell or HP cases based on the measurements), but fits fine in my Antec DF-85 case I bought for my new PC with room to spare. If you're unsure, take some basic measurements before ordering. DIMENSIONS = 4 Stars

3. It is quiet. There is a huge fan on it, but the fan doesnt any real noise at all when I tested it running by itself (case fans disconnected). Running with the 7 other fans in the case didnt change the overall noise profile. NOISE = 5 Stars

4. Running a i5-2500K CPU at 4.5Ghz (overclocked from 3.3Ghz) with Intel stock cooler and CPU running at 100% load: 70 degrees. Same CPU setup with Cool Master Hyper 212 Plus and CPU running at 100% load: 55 degrees. COOLING/VALUE = 5 Stars

6. You can buy and clip on a second fan to the heatsink. So one can push air through the back and the other can blow that air out the front. I think people call this "push-pull". With 8 fans running I dont need a 9th, so I dont know, but its great that you could add a little more cooling ability to the heatsink. EXPANDABILITY = 5 Stars.
70 of 78 people found the following review helpful
OVERCLOCKER MUST BUY!!!! Aug. 21 2009
By R. Gatdula - Published on Amazon.com
Verified Purchase
I stumbled upon this item on accident. I was originally looking at the OCZ Vendetta II but decided to pick this up instead because it was $7 cheaper, excellent online reviews, and future-proof ability. Installation was a hastle because once more I had to remove motherboard from the CoolerMaster 690, but I enjoy the peace of mind with a well mounted hefty heatsink vs the push pins used by other heatsinks of the same proportions.
I have yet to take advantege of using dual 120mm fans, the factory fan seems to be suffice to keep my 3.75Ghz 1.36vcore e5200 consistant at 52C 24hrs on prime95. I cannot distinguish between the noise of this and the three other stock fans in my case except for my XFX9800GT's factory fan. I will recommend this to any enthusiast and even lable the product a "must have". I am looking forward to mounting this on a future planned socket 1366 or 1156. Have a good day.
37 of 41 people found the following review helpful
Quiet and effective Oct. 18 2009
By Dylan Ginsburg - Published on Amazon.com
This is a great CPU cooler for the price. I can push my i5-750 to 4 GHz while keeping temperatures around 60C. I've chosen to throttle it back to 3.6 GHz for 24/7 usage so I can run at a more modest 1.3V and keep the fan at 80% where it's nearly inaudible. The sites that test lots of CPU coolers have shown this to have good cooling and noise performance.

My Gigabyte motherboard doesn't offer much control over the fan speed so I'm using the free SpeedFan program to control the speed for different temperature levels. At idle the processor is 38C and the fan is set to a silent 70%. At full load the processor is 53C and the fan is barely audible at 80%. I like my computer to be quiet.

The mounting bracket is a bit fussy but I had it mounted in 10 minutes or so. It has a backplate which is a good thing because it allows a tighter clamp and puts less stress on the motherboard. I'm cheap and I used the thermal paste that came with it.
16 of 18 people found the following review helpful
Very silent, awesome performance Aug. 30 2010
By fizziksfan - Published on Amazon.com
Verified Purchase
I would recommend this cooler to anyone with a limited budget.
At 26 degrees Celcius room temperature, my i7-920 at stock speed stays at around 37 degrees, which isn't that good (almost same as stock cooler). HOWEVER, when I use Prime95 to stress my CPU, the load is only around 55 degrees. When I overclock my i7 to around 3.4 Ghz, it stays at 40 degrees idle and around 58 degrees on maximum performance.
Therefore, my conclusion is that while this cooler does not show much performance at low temperatures, its efficiency increases as the temperature goes up.
This cooler sells for around $30, and most people should be enough with this, unless you are going to overclock until your CPU becomes almost fried with extra voltage.
This cooler comes with its own thermal compound. The backplate was a little hard to install because the screws did not go through easily.
For installing an after-market cooler for the first time, it took me around 45 minutes to install.
The dual fan configuration does make a slight difference, but not so significant.
Fits almost any mid-tower case. I had an Antec Nine Hundred case, and this cooler fit in my case with over 5mm clearance from the top of the cooler to the side panel, although it blocked me from installing a side fan.

Another thing to note:
This cooler has a sleeve bearing fan. You CAN install it so that the fans are horizontal, but then the fans will be loud and have reduced performance and life. It is NOT RECOMMENDED to do so.
If you want to do the horizontal setting, either get a new fan with rifle, ball bearing or buy a cooler that comes with a rifle or ball bearing fan, such as Cooler Master V8 (Price: $70)