- Product Dimensions: 12.7 x 17.8 x 25.4 cm ; 544 g
- Shipping Weight: 2.4 Kg
- Item model number: PCC1200
- ASIN: B00FYR7ZJI
- Date first available at Amazon.ca: Jan. 5 2015
- Average Customer Review: Be the first to review this item
- Amazon Bestsellers Rank: #73,082 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
Hunter Sprinklers PCC1200 PCC 12-Station Outdoor Irrigation Controller
- The pcc is also compatible with the hunter solar sync
- Install the Solar Sync and the conversion to a "smart controller" is complete
- The PCC will now regulate run times based on local weather conditions
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Would you like to tell us about a lower price?
Focused on cost-effectiveness, the PCC is a residential controller with 6, 9, 12 and 15 station models. With a multitude of features the PCC is designed with the goal of offering homeowners an efficient, easy to use controller.
No customer reviews
|5 star (0%)|
|4 star (0%)|
|3 star (0%)|
|2 star (0%)|
|1 star (0%)|
Review this product
Most helpful customer reviews on Amazon.com
I decided to replace the old Hunter rain sensor as well. May as well start with a whole new system. I purchased Hunter Sprinkler SOLARSYNC Solar Sync Kit for Use with PCC and Pro-C Controllers Sprinklers also on Amazon. Used the old wires to pull the new wires through to the timer/controller. That was pretty easy as well. Next, I installed the Solar Sync module (see second photo) and placed it loosely inside the controller. There was enough room to fit the wires and the module behind the display board. That was pretty easy as well.
I set the solar-sync module per the instructions it came with and set the controller rain sensor to "active." It immediately set the controller to "off." It was a bit drizzly that day, so I didn't think anything of it and thought everything was all set. Nope. After a week, the grass started drying out, so I checked the controller and it still displayed "off." Okay, something was wrong. I switched the controller dial to Solar-Sync and all I see are dashes. I look at the module and all the settings are correct. I looked through the manuals, rechecked the wires. No problems. Somehow something in the manual for the controller (I think) didn't hit me as it should. It said to connect the Solar-Sync wires to the SEN ports on the controller and it didn't mention anything about the module. But I had this Solar-Sync module that came with the box and the instructions for it said to connect those wires to the black and green wires with the sensor wires. It took me about ten minutes to start to wonder if the PCC1200 controller didn't need the Solar-Sync module. No where in both manuals does it say that certain controller models have built in Solar-Sync capabilities, and all that is needed is to connect the sensor unit directly to the controller. This one is one of those with the built-in feature. After removing the module and connecting the sensor wires directly to the controller, everything works fine.