CHOKING HAZARD -- Small parts. Not for children under 3 yrs.
Nostalgic Warehouse Craftsman Plate with Victorian Knob, Passage - 2.375", Antique Brass
- Traditional mounting for vintage or new doors. Complete set including Latch 2 3/8 inch standard back set.
- Coordinates with Nostalgic Warehouse's Premium Grandeur line
- Door thickness range is 1-3/8-Inch to 1-3/4-Inch
- Mortise lock versions available for vintage doors
- 3-Year mechanical and finish warranty
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Inspired by the American Arts & Crafts movement of the early 1900s, the rugged design and hand-hammered details of the Craftsman Long Plate in antique brass emphasizes handwork over mass production. Combine this with our Victorian knob for a extraordinary look fit for royalty. All Nostalgic Warehouse knobs are mounted on a solid (not plated) forged brass base for durability and beauty.
From the manufacturer
Knobs turn and operate a latch but don’t lock. Typically used on interior doors or doors with a separate deadbolt. Ideal for closets, hallways or rooms where no locking mechanism is needed. Standard door thickness range: 1-3/8 to 1-3/4 inches thick.
Latch with locking mechanism. A privacy pin next to the knob or lever provides locking through the plate or rosette. Ideal for bathrooms, bedrooms or rooms where a locking mechanism is needed. Standard door thickness range: 1-3/8 to 1-3/4 inches thick.
Two door sets with no lock or latch. The knobs or levers on this door set don’t turn or operate a latch. Ideal for closet doors, pantry doors or side-by-side French doors (used with roller catch, flush bolts or surface bolts).
Note: Surface mounted or thru-bolted.
Door set for one side of door with no lock or latch. The knobs or levers on this door set don’t turn or operate a latch. Ideal for closet doors, pantry doors or side-by-side French doors (used with roller catch, flush bolts or surface bolts).
Note: Surface mounted.
A mortise lock is a lock that requires a pocket – the mortise – to be cut into the door. The lock is installed into the pocket in the edge of the door. If your door is not already prepared for a mortise lock, you (or a skilled professional) will have to use a mortise saw to cut into the door so the lock fits properly.
Our mortise locks fit 2-1/4 inches Backset and include a skeleton key locking mechanism.
How to Measure for Backset?
When installing a tubular latch with passage or privacy function, it's very important that you know what your backset measurement is - either 2-3/8 or 2-3/4 inches. (see graphic).
The backset is the distance from the edge of the door to center of the 2-1/8 inches (54 millimeter) diameter bore hole.
In the U.S., there are two common backsets for residential door locks, 2-3/8 or 2-3/4 inches.
Dummy sets have no latch and are surface mounted, therefore a backset measurement is not needed.
Nostalgic Warehouse Interior Mortise locks are only offered in 2-1/4 inches backset. Our mortise locks are recommended for interior use only.
|5 star (0%)|
|4 star (0%)|
|3 star (0%)|
|2 star (0%)|
|1 star (0%)|