- Media: Wireless Phone Accessory
- Item Quantity: 1
Panavise InDash Mount Mercedes C220 C230 C280 75128-195
We don't know when or if this item will be back in stock.
- Made in USA from 14 Gauge Steel, powder urethane coated
- Professional Installation Recommend
- For clean, easy, nearly invisible phone mount installation
- Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Brand New PanaVise Custom InDash Mount for the1994-1996Mercedes Benz C220. Model #: 75128-195. ThePanavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, andnearly invisible phone mount installation. Proudly made in theUSA from the highest qualityheavy gauge steel, this Panavise Custom Indash Mounthas been fitted and producedspecifically for yourcar to provide the utmost convenience and practicality. Complete mountinginstructions areincluded with your purchase and are also available below. . Compatible Cars:. 1994-1996 Mercedes Benz C220 1997-2000 Mercedes BenzC230 1994-2000 Mercedes Benz C280; PLEASE NOTE THIS PART IS A CUSTOM ORDER AND SHIPPING MAY TAKE UP TO 14 DAYS. Mounting Instructions. Mounting Location:Right side of Radio. Tools Required:Magnetic Phillips screwdriver, Mercedes radio removal tool (A 000 833 03 61). Hardware Included: (2) self drilling/tapping screws. Step# 01. Remove two screws located just below the radio on the underside of the bezel.. Step# 02. Remove the radio with the special radio removal tools, pull the radio all the way out and set it on the shifter over a rag (to avoid scratching surface). If the radio cables are not long enough, verify that you have the radio code and if you do, dixconnect the radio completely and set it aside.. Step# 03. Remove two screws located on the top portion of the radio's mounting cavity/opening. Pull the bezel, starting from the bottom towards you, just enough to clear the climate control then pull down to release from the top. After bezel is released, move it towards the left to allow you enough room to mount the InDash on the right side of the radio molding.. Step# 04. Place InDash on the right side of the radio cavity and secure with the two self- drilling/tapping screws which are provided. If InDash is positioned properly the part number will be readable from left to right.. Step# 05. Reassemble in reverse order. Be sure to install bezel bottom under the rubber p
|5 star (0%)|
|4 star (0%)|
|3 star (0%)|
|2 star (0%)|
|1 star (0%)|