Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

Vrich Automatic Plant Waterers, Plant Drip Watering Devices, Vacation Plant Waterer Slow Release Irrigation Equipment Houseplant Spikes for Outdoor & Indoor Use (8 Packs)

by Vrich

Currently unavailable.
We don't know when or if this item will be back in stock.
  • This Waterers tool is an ideal irrigation tool for you and your family!
  • If the diameter of vase is more than 20 cm or need more water, you can use 2 pieces to be suppliers
  • Automatically adjust water amount upon soil moisture, really automatic & suitable for seeding and planting
  • Cable Length: 700mm; Package Quantity: 8 Pcs , before you use this product, please refer Product Description
  • Customer Service Guarantee:24-Hour reply,30-Day Money back,6-Month Warranty

Have a question?

Find answers in product info, Q&As, reviews

Please make sure that you've entered a valid question. You can edit your question or post anyway.

Don't see what you're looking for?
There was a problem completing your request. Please try your search again later.
All Product Information Customer Q&A's Customer Reviews

Product details

  • ASIN: B0768849QS
  • Date first available at Amazon.ca: Oct. 7 2017
  • Average Customer Review: Be the first to review this item
  • Would you like to tell us about a lower price?

Product description

●How to use
1. Fill a bucket or a pot about 4 inches with water. Enough to submerge the probe.
2. Take the cap with the tube off the "cone" piece of the probe.
3. Submerge BOTH pieces in the water, completely. You should see bubbles come out.
4. WHILE STILL UNDERWATER, put the cap back on the cone piece.
5. Cover the open end of the cube with finger and remove probe from water.
6. Stick cone piece a little bit into the soil of plan.
7. Stick open end of tube into the BOTTOM of a water bottle or jug. It must be well submerged in the water.

●Issues you may have:
1. Too much water. Move the water bottle/jug a bit lower in height relative to the cone part. This will increase resistance and slow the flow.
2. Not working at all. You did not (a) fully submerge both pieces in water like in above steps or (b) the end of the tube is not low enough in the water jug. you cannot just stick it in the top or it will not work.

Issues you might have:
1. Probe waters too much. Just remove cone from soil and stick only the tip into the soil. This will reduce the flow of water drawn from the probe.
2. Probe does not water at all. You did not (a) fully submerge both pieces in water like in above steps, or (b) the end of the tube is not deep enough in water.

● Tips:

1. In order to watering better, put the bottle watering device level below the high end of the green plastic cover.
2. Please note the demand of each plants and pots size,and uses the appropriate pieces of watering devices.
3. If the diameter of vase is more than 20 cm or need more water, you can use 2 pieces to be suppliers.
3. If failure to water your plants, please repeat the above operation steps.
4. After months of using, the ceramic piece parts need to be cleaned so as not to affect the effect of continue-using.


Customer Questions & Answers

No customer reviews


Review this product

Share your thoughts with other customers

Where's My Stuff?

Delivery & Returns

Need Help?